Guangzhou May Import & Export Trading Co.,Ltd -

Guangzhou May Import & Export Trading Co.,Ltd

Showing 41 - 50 of 51, total 6 pages [First] [Previous] [Next] [Last]

car engine cooling fans
Specification: 1
Detail: Automotive Electronic Cooling Fan is a kind of engine cooling parts usually installed between the engine and the radiator. When the fan blade is driven and rotated by the engine, car cooling fan generates high-speed airflow ...

power window system for car
Specification: 1
Detail: One is a master switch, which can be controlled by the driver to lift the glass of each power window system for car the other is a sub-switch, which is installed in the middle of each window and can be manipulated by passenger...

auto relays
Specification: 1
Detail: Auto off relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil pas...

auto car thermal expansion valves
Specification: 1
Detail: The auto ac expansion valve of the automotive air conditioner is installed at the entrance of the evaporator, and has two main functions. Throttle effect. After the high temperature and high pressure liquid refrigerant is t...

headlight bulbs
Specification: Headlight Bulbs
Detail: HID Headlight Bulb also named Xenon Bulbs High Brightness. 35W xenon lamp can produce 3200 lumens of bright light. Wide color temperature range. HID lamps can produce light with a color temperature of 4000-12000. long...

halogen headlight bulbs
Specification: Halogen Headlight Bulbs
Detail: Halogen bulbs are an improvement of incandescent lamps, which maintain the advantages of incandescent lamps simplicity, low cost, easy adjustment and control of brightness, and good color rendering (Ra=100). At the same time, ...

fuel pump assemblies
Specification: Fuel Pump Assemblies
Detail: EFI fuel pump assemblies is a combination of a electric fuel pump, a fuel gauge sending unit, a pressure regulator valve, a fuel tank pressure sensor. It is an important part of the electronic fuel injection system of automo...

fuel pressure sensors
Specification: Fuel Pressure Sensors
Detail: The fuel vapor vent pressure sensor is used to control the fuel pressure in the fuel circuit, maintain a constant fuel supply pressure to the injector, and return excess fuel to the fuel tank. The fuel pressure acts directly o...

fuel level sensors
Specification: Fuel Level Sensors
Detail: The fuel pump and fuel level sensor uses the principle of the magnetic field generated by the ferrite magnet to control the on-off of the reed switch, and converts the change of the measured fuel level into a resistance voltag...

fuel injectors
Specification: Fuel Injectors
Detail: Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole ...


Showing 41 - 50 of 51, total 6 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6